The inventory has been checked over, programmed, repackaged, and is on its way back to the warehouse. Things should be back to normal by the end of the week.

Thank you all for your patience!

4 Responses to “isosticks programmed and heading back to warehouse!”

  1. Robin February 10, 2015 at 13:11 #

    Good news 🙂
    Do you know when Amazon fills up the inventory? 🙂
    Any news about new firmware update for isostick? AFAIK, there are still issues with (U)EFI’s and there is no new F/W since “2013-02-11 10:46:58” 🙁

    • Eric February 11, 2015 at 19:17 #

      Amazon uses the same Shipwire inventory as our Shopify storefront, but our Amazon isn’t setup for back-orders.
      So, Amazon will be available again as soon as the inventory is scanned in 🙂

      Actively working on a firmware update. There are still some UEFI issues, but they are with the isosel boot menu. The isostick itself still works fine on UEFI, but sometimes you can’t use the boot menu (and may have to disable it by renaming isosel.bin to something else, such as isosel-disabled.bin).

      • Robin February 15, 2015 at 16:52 #

        Thanks for your answer 🙂

        Maybe someday isosel gets an update which fixes that issues 😉

        What issues/features get fixed/added with new firmware?

        • Eric February 16, 2015 at 05:05 #

          Aiming to complete many things while bringing the code up to better standards….

          Forcing isosel after power on, cdrom-only mode, ability to tell isosel where to look for ISOs for the boot menu, a few debug/diagnostic aids.

          Trello has the details: https://trello.com/b/FBQfKqk3

Leave a Reply